Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Step 1
Determine the direction you want your gate to swing.
NOTE: The Stairway Gate, when installed correctly, will only swing in one direction. When using this gate at the top of the stairs,
do not allow the gate to swing over the stairway. Please ensure the release handle is on the side away from child. See Figure 1.
Recess the gate at least 1" from the edge of the top stair.
LEFT SWING INSTALLATION
HINGE
SIDE
WARNING: Do not install gate mounting sockets into sheetrock or plaster. Hardware is included for use
in solid materials such as wood or metal.
Step 2
On the hinge side, measure and secure two of the
mounting sockets using the screws provided.
Use 4 screws for each mounting socket. See dimensions
in Figure 2.
INSTALLATION OF MOUNTING SOCKETS
FOR HINGES
OR WALL
BOTTOM
FIGURE 2
LOCKING
SIDE
FIGURE 1
20
1
/
"
2
4
1
/
"
2
RIGHT SWING INSTALLATION
LOCKING
SIDE
Step 3
On the locking side, measure and secure two of the
mounting sockets using the screws provided.
Use 4 screws for each mounting socket. See dimensions
in Figure 3.
INSTALLATION OF MOUNTING SOCKETS
FOR LOCKING SIDE
22"
3"
FIGURE 3
Page 3
HINGE
SIDE
DOOR JAMB
OR WALL
EQUAL
DISTANCE
TOP &
BOTTOM
Publicidad
