Uninstall; Removing The Blind - Levolor Real Wood & Faux Wood Blinds Instalación

REMOVING THE BLIND

•
Fully raise the blind.
•
Unplug battery pack from the blind.
•
Unlock and lift the front clips of each end box bracket and slide the headrail
out of the brackets.
•
If center support brackets are used, lift the front of the headrail up to clear the
channel of the bracket and slide out forward.
•
Uninstall remaining brackets and battery pack if necessary.
CAUTION: Hold blind firmly when removing. Failure to do so may result in
!
the blind falling and possible injury.

UNINSTALL

Motorized Tilt Operation
15