Operation; Remote Tilit Operation; Manual Tilt Operation; Lift Operation - Levolor Real Wood & Faux Wood Blinds Instalación

OPERATION

REMOTE TILT OPERATION
•
See the Remote Guide.
Remote Control
Guide
Guide de la télécommande
Guía de control remoto

MANUAL TILT OPERATION

•
A manual control button is located on the motor side of the blind. This button
can control the blind without the remote. This button is also used to program
your remote.

LIFT OPERATION

NOTE: Lift control may be corded or cordless depending on what was selected
when ordering.
•
Corded Lift: To raise the blind, pull cord in toward the center of the blind to
release the lock; this allows you to raise and lower the blind. Once the blind is
at the desired height, pull the cord away from the center to lock into position.
•
Cordless Lift: To raise the blind, firmly press and hold the LEVOLOR button
located on the bottom rail and lift the blind to the desired height. Once the
desired position is reached, release grip on the button to lock blind in place.
14
Motorized Tilt Operation