Child Safety - Levolor Real Wood & Faux Wood Blinds Instalación

CHILD SAFETY

WARNING: Inner cords can pull out to form a loop, which can
!
STRANGLE a young child.
•
Inner cord stop devices can reduce this risk if positioned correctly on the pull cords.
•
If inner cord stop devices are more than 6 inches (153 mm) below the headrail
when the blind is fully lowered, move them closer by following the inner cord stop
device adjustment instructions.
To position safety cord-stops:
1. Install blinds as directed by
manufacturer, making sure headrail
is securely fastened. Lower blind to
maximum desired length and lock
into place.
2. Measure the distance from headrail
to cord-stops. If cord-stops are
1 - 2" below the headrail, no further
adjustment is needed. Your blinds are
ready to use.
3. If cord-stops ARE NOT 1 - 2" below
headrail, loosen (but do not untie)
the knot surrounding the cord-stop.
4. Push the cord-stop and the loosened
knot toward the headrail until the cord-
stop is 1 - 2" below the headrail.
5. Hold cord-stop in place and firmly pull
cord to re-tighten knot.
6. Repeat steps 3 through 5 for each
cord-stop.
20
Corded & Cordless Operation
Inner Cord
Cord-Stop
Lift Cord
Cord-Stop
1 to 2 inches
1 to 2 inches
Headrail
6" or less