Krups EA69 Serie Manual De Instrucciones página 13

IFU_KR_COFFEEMAKER_EA69xx_0828344_EN 17/06/10 16:52 Page11
7.2 Rinsing out the circuits: see page 6
7.3 Machine cleaning program – total duration: about 20 minutes
You should perform the cleaning program about every 350 preparations of espresso or coffee.
The appliance will let you know when you need to proceed with cleaning through the 'clean' light
coming on.
! Caution! To benefit from the guarantee conditions, it is essential to perform the appliance
cleaning cycle when informed to do so. Be sure to follow the order of operations.
You can continue to use the appliance, but you are advised to perform the program as soon
as possible.
To perform the cleaning program, you will need a container with minimum capacity of 0.6 litres
and a KRUPS (XS 3000) cleaning tablet.
Press the key to start
the automatic cleaning
program when the
"Cleaning needed"
message is displayed.
!
Note: If your machine is unplugged when cleaning or if there is a power cut, the cleaning programme will
restart at the step in progress when the incident occurred. You will not be able to postpone this operation.
This is essential due to water system rinsing reasons. In this case, a new cleaning tablet may be required.
Be sure to complete the entire cleaning cycle to avoid any risk of irritation (seek medical advice if cleaning
solutions are accidently swallowed). The cleaning cycle is a continuous cycle and the pump can be heard
intermittently. Do not put your hands under the coffee outlets during the cycle.
! Caution! Only use KRUPS (XS3000) cleaning tablets. We cannot be held responsible for any damage
that may result from the use of tablets from other brands.
You can obtain cleaning tablets from KRUPS Service Centres.
! Caution! Make certain to protect your work surface during cleaning cycles, especially if they are
made of marble, stone or wood.
7.4 Automatic scale removal program – total duration: about 22 minutes
!
Caution! If your product is equipped with our Claris - Aqua Filter System cartridge F088 -
Please remove this cartridge during the descaling operation.
The quantity of scale deposited depends on the hardness of the water used. The appliance will
automatically warn you with a message when you need to proceed with scale removal.
Just follow the instruc-
tions shown on the
screen.
ENGLISH
!
Note: The automatic cleaning
program is in three parts –
the cleaning cycle itself, then
2 rinsing cycles. This program
lasts about 20 minutes.
Press to perform cleaning at
any time and then choose
MAINTENANCE => OK
=> CLEANING
from the menus displayed.
11