Moving The Appliance; Electrical Or Electronic Product At End Of Service Life; Problems And Corrective Actions - Krups EA69 Serie Manual De Instrucciones

IFU_KR_COFFEEMAKER_EA69xx_0828344_EN 17/06/10 16:52 Page15
9

MOVING THE APPLIANCE

Keep the packing and use it again to move the appliance.
!
Caution! If the unpacked appliance is dropped, it is advisable to take it back to an authorized ser-
vice centre to avoid any risk of fire or electrical problems.
10
ELECTRICAL OR ELECTRONIC PRODUCT AT END OF
SERVICE LIFE
Let's all help protect the environment !
Your appliance contains many recyclable materials that can be recovered or recycled.
Leave it at a local civic waste collection point.
HELPLINE
If you have any product problems or queries, please contact our Customer Relations Team first for
expert help and advice:
0845 330 6460 - UK
(01) 677 4003 - ROI
or consult our website - www.krups.co.uk
11

PROBLEMS AND CORRECTIVE ACTIONS

The appliance does not switch on
when the "On/Off" is pressed.
Water or steam comes incorrectly out
of the steam nozzle.
The espresso or coffee is not hot
enough.
The coffee is too light or not strong
enough.
The coffee flows too slowly.
Check that the plug of the power cord is pushed correctly
into the mains socket.
In case of repeated operation, several drops may drip from
the steam nozzle.
Change the coffee temperature setting.
Heat the cups by rinsing them with hot water.
Check that the coffee bean tank has coffee in it and that it
is flowing correctly.
Avoid using oily, caramelised or flavoured coffee.
Reduce the volume of coffee using the central knob.
Turn the grinding fineness knob towards the left for a finer
grind.
Prepare in two cycles using the 2 cup function.
Turn the grinding fineness knob towards the right for a
coarser grind (may depend on the type of coffee used).
Carry out one or two rinsing cycles.
ENGLISH
15