Frame Mounting - BGS technic 8460 Manual De Instrucciones

MOUNTING
When assembling the product, do not reach through joints or moveable connections, there is a
•
risk of entrapment.
• Keep children and other unauthorized persons away from the assembly area.
Wear non-slip safety shoes and protective gloves when assembling the product; this applies to
•
both the person who mounting and the helper.
PARTS
No.
1 Frame top tube with chain
2 Rubber plate
3 Chain with eye bolt
4 Hook with Eylet
5 Hex nut M8
6 Leg tube
7 Frame top tube
8 Bolt M8 x 65 mm
9 Washer Ø 8 x 30 mm
10 Lock nut M8
11 Washer Ø 8 x 16 mm
CHAIN MOUNTING
Screw the nut (5) onto the eye bolt of the
chain (3), and push the washer (11) onto the
eye bolt.
Now push the bolt through the frame hole,
and secure it with the washer (11) and nut (5).
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Description
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Qty.
1
4
2
2
8
4
1
2
2
2
12

FRAME MOUNTING

Select the hexagon screw (8) and slide the
washer (11) onto the screw.
Insert the screw in the middle hole of one
frame and place the washer (9) on the
protruding screw part. Insert the screw into the
hole in the second frame and secure it with the
washer (11) and lock nut (10).
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Sketch