Intended Use; Safety Informations - BGS technic 8460 Manual De Instrucciones

Windshield Holder, with Suction Pads

INTENDED USE

This product is used to put down car and van windows when applying window adhesive, installing the
window seal, cleaning the window before installation, etc. and is suitable for windshields, rear
windows. When putting down a window, make sure that the window rests on all four rubber plates.
The maximum load capacity is 70 kg. Any other use and change is contrary to the intended use and,
is not permitted.

SAFETY INFORMATIONS

Use the product only for its intended purpose.
•
Do not use the product as a ladder, climbing frame or anchor point.
•
Keep children and other unauthorized persons away from the work area.
•
• Do not let children play with the product or its packaging.
Always wear appropriate protective equipment and clothing when using this product, e.g.
•
Safety glasses, safety shoes, protective gloves, this applies to the user and helper.
• When installing and removing windows, always use rubber suction cups / window carriers.
Always be careful when handling windows, windows made of laminated safety glass are
•
particularly sensitive to tension.
Always observe the vehicle manufacturer's safety and assembly instructions.
•
• Ask a second person to help you assemble the window and move it. When assembling and
transporting the window without a second person, there is a risk of injury and window
assembly is more difficult.
• Make sure the work area is clean, tidy, well-lit, dry and appropriately equipped.
Keep this product in a dry place out of the reach of children.
•
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8460
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed