MPM MFR-06 Manual De Instrucciones página 22

INSTRUCTIONS FOR USE
1. Plug the power cord (6) to an earthed socket.
2. Use the handle to slide the bowl and basket assembly out (Fig. 1).
3. Insert ingredients to the basket (8).
NOTE! Do not fill over the "MAX" indicator level or exceed the maximum amount of ingredients specified in
the table (see section "APPROXIMATE FRYING TIME") as it may have negative impact on the quality of dishes
prepared.
4. Holding the handle (10), slide the bowl with the basket back in the Fitfryer.
NOTE! Do not touch the bowl during appliance operation or shortly after its operation is completed as the bowl
reaches very high temperatures. Never use the appliance without the basket inserted in the bowl.
5. Press the on switch (3A) to turn on the appliance. The appliance features an automatic switch-
off function. If no button is pressed within 5 minutes from turning on the appliance, it will
turn off automatically.
6. Select a dedicated frying programme using the programme selector "M" (3B). The pro-
gramme icon (3H) will light up, and the frying time and temperature dedicated for the pro-
gramme will be displayed.
7. Modify the frying time and temperature if necessary using the buttons (3D) and (3C). You can
also modify these settings during the programme. It is possible to declare the temperature
and time without selecting any programme, but in this case the appliance will stop the frying
process automatically when you remove the bowl with the basket.
CAUTION! If the appliance was not pre-heated add 3 minutes to the frying time.
8. Press the start/stop button (3A) to start the frying process. The frying process is indicated
with icon animation (3G) and air fan operation. The display (3F) will show the time to end the
frying process.
2
CAUTION! Steam coming out of the outlets during frying is normal. Keep your
hands and face away from the outlets to avoid scalding. You need to shake some
products during frying (fig. 5) (see the table in section "APPROXIMATE FRYING TIME") after
removing the bowl with the basket.
CAUTION! Do not press the basket release button (9) while shaking (fig. 6). To reduce
the weight you can remove the basket from the bowl and shake the basket only: put the bowl
with the basket on a heatproof surface, open the button cover (11) and press the button (9)
6
to remove the basket.
9. A sound signal will indicate that the frying process is over.
CAUTION! You can stop the frying process manually by pressing the start/stop but-
ton (3B). If you press the (3A) button again within 20 seconds, the frying process
will resume. Otherwise, the frying process will be stopped. The air fan may contin-
ue to work for some time after the process has been finished
10
10. Use the handle (10) to slide out the bowl with the basket and check
if all ingredients are ready. If they are not ready, use the handle to
insert the bowl with the basket into the the Fitfryer and add a few
minutes to the time set.
22
14
2
6
2
10
1
6
14
7
10
18
11
14
22
4
1
7
1
11
2
7
4
5
11
19
12
4
23
16
2
5
2
12
3
5
16
6
12
7
13
16
24
17