Functional Description - Bosch Professional GBS 75 AE Manual Original

Ocultar thumbs Ver también para Professional GBS 75 AE:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
16 | English
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to a
complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and pull
the mains plug when the cable is damaged
while working. Damaged cables increase the
risk of an electric shock.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for dry sanding – with
high removal capacity – of wood, plastic, metal,
filler as well as varnished surfaces.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Auxiliary handle
2 Sanding belt*
3 Clamping lever for sanding belt
4 Thumbwheel for belt speed preselection
5 On/Off switch
2 609 932 599 | (10.10.07)
6 Lock-on button for On/Off switch
7 Dust bag
8 Adjustment knob for belt run
9 Extraction outlet
10 Protection cover
11 Dust passage
12 Graphite plate*
13 Guide plate
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Belt Sander
Article number
Rated power input
Output power
No-load belt speed
Sanding belt length
Sanding belt width
Belt speed preselection
Connection for inter-
nal/external dust ex-
traction
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 84 dB(A); Sound
power level 95 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
GBS 75 AE
Professional
0 601 274 7..
W
750
W
410
200 – 330
m/min
mm
533
mm
75
kg
3.4
/ II
Bosch Power Tools

Publicidad

Tabla de contenido
loading

Tabla de contenido