Weather Forecast - Hama EWS-1400 Instrucciones De Uso

• Day
• Weekday
• To select the individual values, press the + button (18) or the –
button (19) and con rm each selection by pressing the MODE
button (17).
• Press the MODE button (17) immediately to adopt the set value
displayed and to skip onwards.
• If you do not make an entry for 15 seconds, you automatically exit
setup mode.
Note – Time zone
• The DCF signal can be received over long distances, but always
transmits the current Central European Time in Germany. Make
sure you account for the time difference in countries with
another time zone.
• If you are in Moscow, the time is 3 hours later than in Germany.
This means that you should set +3 for the time zone. The clock
then automatically sets the time to 3 hours after the DCF signal
received or relative to the manually set time.
Note – Weekday
You can choose from German (GE), English (EN), Danish (DA),
Dutch (DU), Italian (IT), Spanish (SP) and French (FR) for the
weekday display.
Celsius/Fahrenheit
• Press the – button (19) to switch between °C and °F for the
temperature display.
Alarm
• Press the ALARM button (20) to display the alarm time.
• Press and hold the ALARM button (20) for approx. 3 seconds to set
the time of the alarm displayed. The hours display begins to ash.
• Press the + button (18) or the – button (19) to select the hour for
the alarm time and con rm your selection by pressing the ALARM
button (20). The minutes display begins to ash.
• Repeat the process to set the minutes for the alarm time.
• If no entry is made for 15 seconds, setup mode automatically exits.
• Press the ALARM button (20) repeatedly to activate or deactivate
the daily alarm. The alarm symbol (10) will appear or disappear
accordingly.
• If the alarm is triggered, the alarm symbol (10) will begin to ash
and an alarm will sound.
• Press any button except SNOOZE / LIGHT (22) to stop the alarm.
Otherwise, it will stop automatically after 2 minutes.
Note – Snooze function
• While the alarm signal is sounding, press the SNOOZE/LIGHT
button (22) to activate the snooze function. Zz begins to ash on
the display. The alarm signal will be stopped for 5 minutes, after
which it will sound again.
Note – Snooze function
• Press any button (except the SNOOZE/LIGHT button (22)) to stop
the snooze function and the alarm.

6.3. Weather forecast

• Based on changes in the atmospheric pressure and the data saved,
the base station is able to make weather forecasts for the next 12
to 24 hours.
Note – Weather forecast
The weather forecast function is not available during the rst few
hours of operation because it requires data that is collected during
operation.
The weather forecast and the current weather are indicated by ve
different symbols (3):
Symbol (3)
• The weather station indicates a trend as to how the values for the
outdoor humidity (15), room humidity (7) and atmospheric pressure
(4) are likely to develop over the next few hours.
Display
Weather
Sunny
Slightly cloudy
Cloudy
Rainy
Stormy
Trend
Increasing
Constant
Decreasing
5