Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
• Repeat the process to set the minutes for the alarm time.
• Press the alarm button (15) repeatedly to also set the other
alarm mode or return to the time display (3).
• If you do not make an entry for 2 minutes, you automatically
exit the setup mode.
Note – Alarm
• When activated, the weekday alarm only triggers an alarm
on weekdays (Monday to Friday). The alarm symbol (5)
is displayed if this alarm is activated.
• When activated, the once-only alarm only triggers an alarm
once. The alarm symbol (5)
activated. This alarm is automatically deactivated after the
alarm has sounded.
• When activated and when the outside temperature is <
0°C/ 32°F, the early alarm triggers an alarm 15, 30, 45, 60
or 90 minutes before the actual alarm (
). The alarm symbol (5)
is activated.
• In the corresponding display, press the
button (19) to activate/deactivate the corresponding alarm.
The alarm symbol (5) will appear/not appear.
Note – Early alarm
The early alarm can only be activated if at least one of the two
alarm functions (
/
• If the alarm is triggered, the alarm symbol (5) will begin to flash
and an alarm will sound.
• Press the alarm button (15) to stop the alarm. Otherwise, it will
stop automatically after 2 minutes. .
Note - Snooze function
• The alarm symbol (5) begins to flash in the display.
• The alarm signal is stopped for 8 minutes, after which it
will sound again.
• The snooze function can be activated three consecutive
times.
6
is displayed if this alarm is
and/or
is displayed if this alarm
button (18) or the
) has already been activated.
6.3. Weather
Note – Temperature mode
• Press the
button (18) or the
until the
symbol starts flashing in the display.
Celsius/Fahrenheit
• In temperature mode, press and hold the mode button (17) for
approx. 3 seconds to switch the temperature display between
°C and °F.

Weather forecast

• Based on changes in the atmospheric pressure and the data
saved, the base station is able to make weather forecasts for the
next 12 to 24 hours.
Note – Weather forecast
• The weather forecast function is not available during the
first few hours of operation because it requires data that is
collected during operation.
• The weather forecast and the current weather are indicated by
different symbols (8):
Symbol (8)
button (19) repeatedly
Weather
Sun
Slightly cloudy
Cloudy
Rain
Heavy rain
Snow
Heavy snow

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

00136263

Tabla de contenido