Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2. Maintain a distance of 20cm (7 inches) between the unit and walls or other objects for
ventilation. Increase this distance if the obstacle is a heat source.
Note: Before using the appliance for the first time, clean the shelves and interior with soapy
water.
3. Set the brakes on the castors to keep the appliance in position OR level the appliance by
adjusting the screw feet.
Removing the Compressor Safety Band
The compressor is located on the top of the appliance, and sits on rubber washers. Under
normal operating conditions the compressor is allowed to vibrate.
To avoid damage through excessive motion during transit, a stainless steel safety band is placed
over the compressor and screwed into the top of the appliance.
This safety band and the two screws fixing it to the appliance must be removed before the
appliance is turn on.
Lock/Unlock the Doors
A lock is fitted to the doors to ensure foodstuffs are kept secure within your appliance.
Use the keys provided to lock/unlock the door.
Fitting the Waste Water Tray
The waste water tray comes ready to fit to the underside of the appliance. Slide the tray into
the runners sited under the appliance.
Fitting the Shelves
1. Place one set of shelf guides on either side of the cabinet at the desired height.
2. Slide the shelf into place.
3. Repeat for the remaining shelves.
Note: This is vital for ensuring correct drainage of condensation.
Operation
Storing Food
To get the best result from your appliance, follow these instructions:
· Only store foodstuffs in the appliance when it has reached the correct operating temperature.
· Do not place uncovered hot food or liquid inside the appliance.
· Warp or cover food where possible.
· Do not obstruct the fans inside the appliance.
· Avoid opening the doors for prolonged periods of time.
Turn on
1. Close the door(s) of the appliance.
2. Ensure the power switch is set to [O] and turn on at the socket.
13
Publicidad
