Deville (DHS, DTS) 2000-2005
1. Remove all tabs from the radio housing top. (Figure A)
2. Attach the radio brackets to the radio housing. Leave all side tabs on the radio
brackets attached, but cut away the plastic armature below each bracket at the
bottom of both sides. (Figure B)
3. When installing the 95-2005 assembly into the dash, use the supplied (4) #8 x
3/8" Phillips screws, to the locations shown. (Figure C)
Continue to kit assembly
(Figure A)
95-2005B
Kit Preparation
(Figure B)
(Figure C)
7