1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-5850B
  6. Instrucciones de instalación

Metra 95-5850B Instrucciones De Instalación

Ford f-250 xl 2017-actual; ford f-350 xl 2017-actual; ford f-450 xl 2017-actual; ford f-550 xl 2017-actual
Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Switch trim panel • D) #8 x 3/8" Phillips screws (4)• E) #6 x 3/8" Phillips screws (4) • F) Panel clips (6)
A
B
Metra. The World's Best Kits.
®
Ford F-250/350/450/550 XL
*Visit MetraOnline.com for up-to-date vehicle specific applications.
KIT FEATURES
• ISO DDIN radio provision
• Painted scratch-resistant matte black to match the
factory color and finish
C
D
MetraOnline.com
2017-up
(w/o color screen)
E
E F
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
95-5850B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . .................................................2
Kit Preparation . ......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Visit metraonline.com for audio and steering
wheel interface options.
Antenna Adapter: 40-EU10
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32" socket wrench • Torx screwdriver
Attention!
With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
REV. 7/19/21 INST95-5850B

Publicidad

Tabla de contenido
loading

Manuales relacionados para Metra 95-5850B

Resumen de contenidos para Metra 95-5850B

  • Página 1 Ensure that all installation connections are secure before cycling the ignition to test this product. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/19/21 INST95-5850B...

  • Página 2: Dash Disassembly

    1. Remove (4) Torx screws securing the climate exposed. (Figure A) control panel, then remove. (Figure A). 2. Unclip and remove the pocket, then 2. Unclip and remove the switches. (Figure A) remove (2) 9/32” screws exposed. 3. Unclip and remove the LINE IN jack. (Figure A) (Figure B) 4. Unclip and remove the power port assembly. 3. Unclip, unplug, and remove the climate- (Figure A) control/radio trim panel. To the 95-5850B climate-control/radio trim panel: Continue to Kit Preparation (Figure A) (Figure A) 5. Secure the climate control panel to the panel using (4) #6 x 3/8” Phillips screws provided. (Figure B) 6. Secure the switch trim panel to the panel using (4) #8 x 3/8” Phillips pan-head screws provided. (Figure B) 7. Snap the factory switches into the switch panel. (Figure B) 8. Snap the LINE IN jack to the panel. (Figure B)

  • Página 3: Kit Assembly

    KIT ASSEMBLY ISO DDIN radio provision Attach the radio brackets to the radio using the screws supplied with the radio. (Figure A) Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or AXXESS. Test the radio for proper operation. 3. Remove (4) screws in the dash cavity, then secure the completed assembly into the dash using those screws. (Figure B) (Figure A) (Figure B) Snap the radio trim panel over the completed assembly, then reassemble the dash in reverse order of disassembly to complete the installation. REV. 7/19/2021 INST95-5850B...
  • Página 4 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/19/21 INST95-5850B...
  • Página 5 Al probar el equipo del mercado de accesorios, asegúrese de que todo el equipo de fábrica esté conectado antes de encender el llave de encendido. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/19/21 INST95-5850B...

  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO PREPARACIÓN DEL KIT 1. Quite el tapete de almacenamiento en Del panel de moldura para radio / control de clima la cavidad que está encima del panel de de fábrica: moldura para radio / control de clima. 1.

  • Página 7: Ensamble Del Kit

    Metra recomienda el uso de adaptadores de acoplamiento adecuados de Metra o de Axxess. Pruebe el radio para asegurarse de que funciona bien. 3. Quite los (4) tornillos en la cavidad del tablero.
  • Página 8 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/19/21 INST95-5850B...

Tabla de contenido