Tools And Materials; Before You Begin - Kohler 3936-NA Guia De Instalacion

Tools and Materials

Construction
Adhesive

Before You Begin

WARNING: Risk of personal injury. Metal surfaces are
sharp and can cause severe cuts. Use gloves and handle sink
edges carefully.
IMPORTANT! Refer to the "Roughing-In" section for cabinet
dimensional requirements.
IMPORTANT! Install this sink before installing the countertop.
Measure the cut-line from the front face of the cabinet.
IMPORTANT! Long screws may damage adjacent cabinets. Ensure
that the screws are long enough to secure the support framing, but
short enough so they do not extend through the walls of adjacent
cabinets.
Due to the nature of under-mount installations, Kohler Co.
recommends that only trained and experienced installers perform
under-mount sink installations.
Use proper fasteners and techniques to ensure that the frame will
support a minimum of 300 lbs (136 kg). Locate the fasteners for
easy access in the event the sink needs to be removed in the
future.
For K-3936 Only: This sink is intended for installation into a
standard 30" base cabinet.
For K-3943 and K-3945 Only: This sink is intended for
installation into a standard 36" base cabinet.
Anchors and fasteners to be provided and installed by the
countertop manufacturer.
1166709-2-B
Plus:
• Suitable Support Framing
Material [3/4" (19 mm)
Max Thickness]
Wood 100% Silicone
Screws Sealant
2
Painter's
Tape
Kohler Co.