Packing List - Ego Power+ CS1400E Manual Del Operador

Measured sound 96.73 dB(A)
power level L K =2.5 dB(A)
WA WA
Sound pressure
85.73 dB(A)
level at operator's
K =2.5 dB(A)
ear L
PA
PA
Guaranteed sound
power level L
100 dB(A)
WA
(according to
2000/14/EC)
Rear 5.373 m/s
Handle K=1.5 m/s
Vibration
a
Front 4.146 m/s
h
Handle K=1.5 m/s
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used;In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.

PACKING LIST

PART NAME
Chain saw power head
Saw chain
Guide bar
Chain sheath
Operator's manual
DESCRIPTION
KNOW YOUR CHAIN SAW (Fig. A)
1. Trigger Switch
2. Lock-off Button
3. Battery-release Button
4. Oil Tank Cap
5. Oil Inspection Window
6. Saw Chain
7. Guide Bar
8. Latch
56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E
9. Ejection Mechanism
96.4 dB(A)
10. Electric Contacts
K =2.5 dB(A)
WA
11. Chain Kickback Brake Handle
85.4 dB(A) K =2.5
12. Chain Tensioning Knob
PA
dB(A)
13. Front Handle
14. Rear Handle
15. Chain Tensioning Screw
99 dB(A)
16. Side Cover
17. Side Cover Knob
3.222 m/s K=1.5
2 2
18. Chain Sheath
m/s
2 2
19. Lubricating Hole
3.081 m/s K=1.5
2 2
20. Sprocket in Guide Bar Tip
m/s
2 2
NOTICE:
lever for chain brake activation. It also provides protection
against projecting branches and helps prevent the left hand
from touching the saw chain if it slips off the front handle.
ASSEMBLY
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
or create accessories not recommended for use with this
QUANTITY chain saw. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
1
possible serious personal injury.
1
1
cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
1
1
user should, as a minimum, practice cutting logs on a
saw-horse or cradle
ASSEMBLING/REPLACING THE BAR AND CHAIN
and chain; these components are sharp and may contain burrs.
1. Position the chain saw power head on its side with
2. Turn the side cover knob counterclockwise to remove
3. Lay the new saw chain in a loop on a flat surface and
The chain kickback brake handle services as the
WARNING:
If any parts are damaged or missing,
WARNING:
Do not attempt to modify this product
WARNING:
To prevent accidental starting that could
WARNING:
It is recommended that the first-time
WARNING:
Always wear gloves when handling the bar
the side cover facing upwards (Fig. H).
the side cover and then loosen the chain tensioning
knob as much as possible.
straighten any kinks (Fig. I).
EN
11