Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ÉPIX™ Drive 642 QRG
Firmware Update
Items Needed
Instructions
ÉPIX™ Drive 642 software update instructions:
·
ÉPIX™ Drive 642
·
Windows PC
1.
Download the ÉPIX™ Drive 642 upload software from
www.chauvetprofessional.com
2.
Download the latest firmware update from www.chauvetprofessional.com.
3.
Set the IP address of the computer to 192.168.1.X
(X being any number from 1–255).
4.
Set the Subnet Mask to 255.255.255.0.
5.
Connect the ÉPIX Drive 642 to the computer using the ethernet cable.
6.
Open the ÉPIX™ Drive 642 upload software.
7.
Press and hold <MENU> and <ENTER> on the product, then turn it
on. The display will flash, indicating the product is in Force Upgrade
mode.
8.
Select the latest firmware update to upload.
·
New ÉPIX™ Drive Network Card
·
Ethernet Cable
and install it.
12
EN
Publicidad
Tabla de contenido
