ÉPIX™ Drive 642 QRG
About this
Guide
Disclaimer
Safety Notes
The ÉPIX Drive 642 Quick Reference Guide (QRG) has basic product
information such as connection, mounting, menu options, and DMX
values. Download the User Manual from
for more details.
The information and specifications contained in this QRG are subject to
change without notice.
·
DO NOT open this product. It contains no user-serviceable parts.
·
To eliminate unnecessary wear and improve its lifespan, during
periods of non-use completely disconnect the product from power via
breaker or by unplugging it.
·
CAUTION: When transferring product from extreme temperature
environments, (e.g. cold truck to warm humid ballroom)
condensation may form on the internal electronics of the product. To
avoid causing a failure, allow product to fully acclimate to the
surrounding environment before connecting it to power.
·
CAUTION: This product's housing may be hot when lights are
operating.
·
Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
·
DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
·
This product is for indoor use only! To prevent risk of fire or shock,
do not expose this product to rain or moisture.
·
DO NOT connect this product to a dimmer or rheostat.
·
ONLY connect this product to a grounded and protected circuit.
·
Always make sure you are connecting this product to the proper
voltage, as per the
product's specification label.
·
Do not operate this product if you see damage on the housing,
I/O ports, or cables. Have the damaged parts replaced by a Chauvet
certified technician at once.
·
Do not cover the ventilation slots when operating to avoid internal
overheating.
·
The maximum ambient temperature is 104 °F (40 °C). Do not operate
this product at a higher temperature.
·
In case of a serious operating problem, stop using this product
immediately!
Technical Specifications
2
www.chauvetprofessional.com
in this guide or on the
EN