Chauvet Professional EPIX DRIVE 642 Guía De Referencia Rápida página 3

ÉPIX™ Drive 642 QRG
Contact
What Is
Included
Product
Description
AC Power
Replacing the
fuse
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact
your distributor to request support or return a product. Visit
www.chauvetprofessional.com
·
ÉPIX™ Drive 642
·
Warranty Card
·
Quick Reference Guide
If there are any missing pieces, please contact the local dealer where
you purchased the product.
ÉPIX™ Drive 642 hosts the processing and power supply for the ÉPIX™
2.0 product line in one convenient device. It controls up to 16 ÉPIX™
Strip 2.0, 4 ÉPIX™ Bar 2.0, or 4 ÉPIX™ Tile 2.0 using Art-Net™
(3.0 compliant) or Arkaos Kling-Net. Additionally, you can manage
configuration and software updates with a network-based remote web
server.
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during
periods of non-use completely disconnect the product from power via
breaker or by unplugging it.
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove the blown fuse and replace with a good fuse of the same type
and rating.
4. Screw the fuse holder cap back into place and reconnect the power.
for contact information.
·
Neutrik® powerCON® to
Edison Plug Input Power Cord
3
EN