Visual Inspection; Drying And Storage - Pari MONTESOL Instrucciones De Uso

Ocultar thumbs Ver también para MONTESOL:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
CAUTION
Inadequate disinfection encourages the growth of bacteria
and thus increases the risk of infection. Thorough disinfec-
tion has not been completed until the disinfector automatic-
ally switches itself off, or the minimum disinfection time spe-
cified in the instructions for use of the disinfector has
elapsed. Therefore, do not switch the device off prematurely.
Also make sure that the disinfector is kept clean and regu-
larly check that it is in good working order.

4.4 Visual inspection

Inspect all product components after each cleaning and disin-
fection. If any components have been damaged, the whole
product must be replaced.

4.5 Drying and storage

• You can remove excess water more quickly by shaking all
parts.
• Attach the valve to the reservoir.
• Insert the knee in the hole in
the valve.
• Insert the nasal insert in the
aperture in the knee.
• Hang the nasal douche up by
the strap on the valve to dry.
– 28 –

Publicidad

Tabla de contenido
loading

Tabla de contenido