Dust Collection - BLACK&DECKER MS2000 Manual De Instrucciones

Setting Application
Sanding tight and
hard to reach areas.
Light, detail sanding.
Sanding areas with
corners.
Paint / Stain removal.
Surface preperation for
painting.
Flush sanding - up to
the edge.
Sanding doors and
window frames.
Paint / Stain removal.
Sanding large areas.
Remove the most
amount of material
quickly.
Paint / Stain removal.
Surface preperation
for painting.
Automatic brake system (ABS)
This tool has an automatic brake system. When the tool is not on the work surface, this
feature keeps the speed of the disc below the speed of the motor. When the tool is
switched off, the disc will stop very quickly.

Dust Collection

wARNING: Collected sanding dust from sanding surface coatings (polyurethane,
linseed oil, etc.) can self-ignite in sander dust canister or elsewhere and cause fire. To
reduce risk, empty canister frequently and strictly follow sander manual and coating
manufacturer's instructions.
CAuTION: When working on metal surfaces, do not use the dust canister or a vacuum
cleaner because sparks are generated. Wear safety glasses and a dust mask. Due to the
danger of fire, do not use your sander to sand magnesium surfaces. Do not use for wet
sanding.
Dust canister - figure L
Attaching and removing:
• Fit the dust canister over the dust extraction
outlet. To remove the canister, pull it out to the
rear and off the outlet.
Emptying:
• Remove canister and shake out debris over a
trash can.
SMART SELECT TEChNOLOGy ChART
Recommended Base
Detail finger
attachment
Large
detail base
- tip facing
forward
Flush
sanding
base - 90º
edge facing
forward
Random
orbit base
Base Color Speed Setting
l
9
Orange (1) Low
Blue (1) Low
(2) High
Blue
(2) High
Green