Compatibility - Pioneer SGY-PM910H2 Manual De Usuario

EN
Crank set
This product supports the following crank sets.
Crank set
SHIMANO FC-9000
SHIMANO FC-6800
* This manual explains the crank set of 170 mm length with examples.
• When replacing the chain ring, be careful not to disconnect the junction cable of the right
pedaling monitor sensor. See the video on how to remove the chain ring first on
http://pioneer-cyclesports.com/us-en/support/products/ to confirm the procedure.
Special skills and tools are needed for the installation and calibration of the
product. To install and calibrate, always ask the shop from where you bought the
product to do it.
Since the product is attached to the crank set with an adhesive, it cannot be
removed without destroying the sensor.
6

Compatibility

Supports 165 / 167.5 / 170 / 172.5 / 175 / 177.5 / 180 mm crank length,
and 50-34T / 52-36T / 52-38T / 53-39T / 54-42T / 55-42T crank sets. *
Supports 165 / 170 / 172.5 / 175 mm crank length and 50-34T / 52-36T /
53-39T crank sets. *
Remarks