Care and Cleaning (cont.)
Using a small screwdriver or bent wire, carefully lift the strainer
vertically from the drain. Clean the strainer and set it aside.
Quickly pour one gallon of water directly into the drain. Do not
let the urinal overflow. This will purge the residual urine and
sealing liquid.
Unscrew the spray nozzle from the cleaner bottle. Pour 1 oz. (30
ml) or 2 tablespoons of cleaner directly into the drain.
Allow the cleaner to stand for 5 to 10 minutes.
Pour two gallons of water directly into the drain as quickly as
possible. Do not let the urinal overflow.
Pour 3 oz. (90 ml) or approximately 1/3 cup of sealing liquid
directly into the drain.
Reinstall the strainer.
Set a fresh urinal ball in the urinal.
Winterizing the Urinal
Repeat the daily and flush-out cleaning procedures, but do not
replace the sealing liquid or urinal ball after the flush-out.
NOTE: Use recreational-use antifreeze only. Recreational-use
antifreeze is specifically formulated for winterizing all types of
potable water supply systems, preventing rust, and protecting metal
pipes.
Pour recreational-use antifreeze directly into the drain.
Reinstall the strainer.
IMPORTANT! Before using the urinal again, remove the strainer
and flush out the antifreeze with 1 gallon (3.79 L) of water. Pour 3
oz. (90 ml) or approximately 1/3 cup of sealing liquid directly into
the drain, then reinstall the strainer. Set a fresh urinal ball in the
urinal. The urinal is now ready for use.
Warranty
ONE-YEAR LIMITED WARRANTY
KOHLER plumbing products are warranted to be free of defects in
material and workmanship for one year from date of installation.
Kohler Co. will, at its election, repair, replace or make appropriate
adjustment where Kohler Co. inspection discloses any such defects
occurring in normal usage within one (1) year after installation. Kohler
Kohler Co.
3
1048744-5-D