Descargar Imprimir esta página

Installation Instruction - bosal 013-138 Manual De Instrucciones

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
44 04 03 07/13 / 06.08 / VA
Packing list: 1 Cable set
1 Socket
1 Socket retaining plate
1.
Disconnect the earth lead from the battery.
2.
Limousine:
Uncover boot floor lid and rear lights screens. Disassemble left stringer screen in boot floor in front of left lights and
drill a hole of 20 mm diameter in proper place (between left stringer and spare wheel well).
Touring
3.
Uncover boot floor lid and open left and right side hatch. Uncover rear lights screens. Drill a hole of 20 mm diameter
in proper place (between left stringer and spare wheel well) near end of rear metal plate.
4.
Protect edge with an anticorrosive agent.
5.
Connect the cable set in the following way:
a) Pull the end of cable set with metal terminal and attached rubber grommet through the hole described in point 3
from boot outside to socket mounting point,
b) Draw attached rubber socket retaining plate over the end of cable set (if necessary use anti-friction agent),
c) Disassemble the socket and connect cables according to the following assignment:
7 pin
Function
Indicator left
Fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Fog light
13 pin
Function
Indicator left
Trailer fog light
Rear fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Reversing light
Trailer current supply
Charge line plus
Charge line earth
Not assigned
Earth (trailer)
6.
Push the socket with rubber retaining plate and screw the socket tightly onto the retaining plate using the supplied
nuts and screws:
a) Pay special attention to the right position of rubber retaining plate,
b) Put the cable set gently to avoid any folds and to secure it from possible wiping.
Electrical Set for Trailer Connection
Part no.:
7-pin
Part no.:
13-pin
3 Screws M5X35
3 Nuts M5
3 Spring washer

Installation instruction

Contact description
Cable colour
1
(L)
black/white
2
(54-G)
grey
3
(31)
brown
4
(R)
black/green
5
(58-R)
grey/red
6
(54)
black/red
7
(58-L)
grey / black
8
(58-b)
grey/white
Contact description
Cable colour
1
black/white
2
grey
2a
grey/white
3
brown
4
black/green
5
grey/red
6
black/red
7
grey/black
8
blue/green
9
red/blue 2,5mm
10
yellow 2,5mm
11
white/brown 2,5mm
12
13
white/brown 2,5mm
BMW 3er E36 Lim. manufactured 08.90-03.98
BMW 3er E36 Touring manufactured 08.90-03.98
BMW 3er E36 Lim. manufactured 08.90-03.98
BMW 3er E36 Touring manufactured 08.90-03.98
2
2
2
2
1 Rubber grommet
8 Cable ties
1
2
6
7
3
5
4
8
Contact description in
7-pin socket
8
7
9
1
10
6
2
4
3
5
11
12
13
2a
Contact description in
13-pin socket

Publicidad

loading