Master DH 716 Manual De Instrucciones Para El Uso Y Mantenimiento página 5

en
1... HOW IT WORKS
CZ
2... WHERE TO POSITION
DE 3... BEFORE USE
4... PARTS
DK
5... OPERATION
6... DRAINAGE
EE
7... MAINTENANCE
ES
8... TROUBLE SHOOTING
FI
PLEASE TAKE TIME TO READ THIS MANUAL
CAREFULLY BEFORE USE AND SAVE IT FOR
FR
FUTURE REFERENCE.
►► 1. HOW IT WORKS
►
GB
This product is a dehumidifier. It controls relative humidi-
ty by passing the air through the unit, forcing the excess
HR
moisture to condensate over the cooling elements. Contact
with this cold surface causes the moisture in the air to con-
HU
dense. This condensed water then drains safely into the
water tank. The dried air then passes through the conden-
ser where it is slightly warmed and re-enters the room at a
IT
slightly elevated temperature.
► FIG. 1
LT
1. Dry warmer air
2. Condenser (warmed coil)
LV
3. Evaporator (cold refrigerated coil)
4. Moist saturated air
5. Water tank
NL
6. Compressor
7. Motor
NO
8. Fan rotor
PL
►► 2. WHERE TO POSITION
►
Excess moisture will travel throughout your home, in the
same way that cooking smells waft to every room in the
RO
house. For this reason, the dehumidifier should be posi-
tioned, so that it can draw this moist air towards it from all
RU
over the home.
Alternatively, if you have a serious problem in one area you
SE
can begin by positioning the dehumidifier close to this area
and later moving it to a more central point.
When positioning the dehumidifier, ensure that it is placed
SI
on a level surface and that there is a minimum of 10 cm
(4") of space on either side of the unit to allow for efficient
SK
airflow.
This dehumidifier is fitted with castors for extra mobility, if
UA
you move the unit, it should first be switched off and the
water tank emptied.
We do not recommend the use of an extension lead, so
SE
please try to ensure that the unit is sufficiently close to a
fixed mains socket. If it is necessary to use am extension
SI
lead, please ensure the diameter of the wires of the cable
is at least 1 mm .
2
SK
When the dehumidifier is in operation, outside doors and
windows should be closed when necessary for most ef-
ficient use .
TR
UA
CONTENTS
►► 3. BEFORE USE
►
CAUTION!
► Always keep the unit in vertical position.
► Leave the unit to stand for one hour before connecting
to the mains supply after transport or when it has been
tilted (e.g. during cleaning).
► Keep all foreign objects away from the air intake or out-
put openings.
► The mains supply must conform to the specification
shown on the rating plate at the back of the unit.
► If the supply cord is damaged, it must be replaced by
an approved service representative or a similar qualified
person in order to avoid a hazard.
► Never use the plug to start and stop the unit. Always
use switch on the control panel.
► Before moving the unit, first switch off, then unplug and
empty the water tank.
► Don't use bug sprays or other flammable cleaners on
the unit.
► Never pour or spray water over the unit.
► THIS APPLIANCE IS NOT INTENDED FOR USE BY
PERSONS (INCLUDING CHILDREN) WITH REDUCED
PHYSICAL , SENSORY OR MENTAL CAPABILITIES, OR
LACK OF EXPERIENCE AND KNOWLEDGE , UNLESS
THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUC-
TION CONCERNING USE OF THE APPLIANCE BY A
PERSON RESPONSIBLE FOR THEIR SAFETY. CHILD-
REN SHOULD BE SUPERVISED TO ENSURE THAT
THEY DO NOT PLAY WITH APPLIANCE.
IMPORTANT!
Do not use this unit at ambient temperatures below 5
prevent the possibility of a heavily ice up evaporating coil.
►► 4. PARTS
►
► Front FIG. 2
1. Control panel
2. Ambient light
3. Front plate
4. Rear plate
► Rear FIG. 3
5. Wind flap
6. Handle
7. Air inlet / Filters
8. Water level window
9. Water tank
►► 5. OPERATION
►
► Control panel FIG. 4
1. Humidity setting button
C, to
O