Intended Use - SEVERIN WK 3454 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
∙ Keep both the cord and the appliance
itself well away from heat sources (eg
hot-plates, gas flames).

Intended use

∙ The appliance must only be used for
heating clean, fresh water and for
making hot beverages.
∙ Warning! Any other use not stated in
the instructions (misuse) is considered
as not intended and can cause severe
personal injury or damage to the
appliance.
∙ This appliance is intended for
domestic or similar applications, such
as
- in staff kitchens in shops, offices and
other similar working environments,
- in agricultural working environments,
- by customers in hotels, motels etc.
and similar accommodation,
- in bed-and breakfast type
environments.
∙ Do not leave the appliance unattended
while connected.
In case of a defective appliance
A defective appliance can cause
material damage and injury:
∙ Check the appliance for damage
before every use. Do not operate if the
appliance shows any sign of damage.
∙ In the event that you detect damage,
please contact our customer service
department by phone or email (see
appendix).
∙ Repairs to this appliance or its power
cord must only be carried out by our
customer service.
Overview and parts included
1.
Identification plate (underside of base)
2.
Base with cable storage
3.
Power cord with plug
4.
Spout with limescale filter
5.
Handle
6.
Removable lid
7.
Water container with water level indicator
Item no. 3454:
8.
On/off switch with indicator light
Item no. 3459:
8.
On/Off switch
9.
Light ring
Thermal safety cut-out
The pre-set thermal safety cut-out protects the heating
element from overheating should the appliance be
erroneously switched on without any water, or if the heating
plate is calcified. If the safety cut-out has been activated,
the appliance cannot be switched on again. In such a case,
the appliance must be allowed to cool down, or must be
descaled, before it is switched on again.
Before using for the first time
∙ Unpack the appliance completely and remove all
packaging materials.
∙ For hygienic reasons, throw away the first boiled filling of
the new kettle.
Boiling process
∙ Take the water container off the base and remove the
lid.
∙ Fill the water container with the desired amount of water.
Observe the Min (0.5 l) and Max markings (1.7 l) for
filling.
∙ Put the lid on.
∙ Place the container back on its base.
∙ Plug in the mains power plug and turn on the kettle
using the on/off switch.
Item no. 3454: The indicator light stays on as long as the
appliance is switched on.
Item no. 3459: The light ring stays on as long as the
appliance is switched on.
∙ The boiling process starts and the automatic steam stop
turns the kettle off automatically after it reaches boiling
point.
∙ The process can be cancelled at any time by pressing
the On/Off switch.
∙ To pour hot water, remove the container from its base.
∙ The lid must be kept closed when pouring hot water, so
that hot steam does not come out. Caution! Hot steam
can rise upwards during pouring!
∙ Remove the plug from the wall outlet after use.
∙ Do not leave any residual water in the container.
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wk 3459

Tabla de contenido