Grounding And Ac Power Cord Connections - Schumacher Electric SE-1072 Manual Del Usuario

All manuals and user guides at all-guides.com
7.5 Do not face the battery when making the final connection. As stated in 7.4,
face away from the battery when connecting the negative clip to the cable.
7.6 Connect charger AC supply cord to electrical outlet.
7.7 When disconnecting the charger, always do so in the reverse order of the
connecting procedure and break the first connection while as far away from the
battery as practical.
7.8 A marine (boat) battery must be removed and charged on shore. To charge it
onboard requires equipment specially designed for marine use.
8.

GROUNDING AND AC POWER CORD CONNECTIONS

8.1 This battery charger is for use on a nominal 120-volt
circuit and has a grounded plug that looks like the plug
illustrated. The charger must be grounded to reduce
the risk of electric shock. The plug must be plugged
into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances. The
plug pins must fit the receptacle (outlet). Do not use with
an ungrounded system.
8.2
the outlet, have a proper grounded outlet installed by a qualified electrician. An
improper connection can result in a risk of an electric shock or electrocution.
NOTE: Pursuant to Canadian Regulations, use of an adapter plug is not
allowed in Canada. Use of an adapter plug in the United States is not
recommended and should not be used.
8.3 Recommended minimum AWG size for extension cord:
• 100 feet long or less - use a 10 gauge extension cord.
• Over 100 feet long - use an 8 gauge extension cord.
RISK OF ELECTRIC SHOCK OR FIRE.
Never alter the AC cord or plug provided – if it does not fit
6
• •