Digital Av Connections; Connecting External Equipment To Hdmi Input - Sanyo DP42746 Manual De Instrucciones

This is the best option for picture and sound! Using the HDMI connection, which has high-definition
content protection, provides you with uncompressed digital video and audio, Dolby ® Digital 5.1 or
PCM sound. This connection requires only one cable. As Real As It Gets!
CONNECTING EXTERNAL EQUIPMENT TO HDMI
(INCLUDES HDCP COPY PROTECTION)
To avoid problems with some brands of external equip-
ment, follow this procedure when connecting cables and
powering on your equipment.
1
Switch off DTV and external equipment before con-
necting cable. (Cable is not supplied.)
2
Connect the external equipment's high bandwidth
HDMI Output to the DTV's HDMI Input.
3
The DTV must be turned on first, press POWER. Then
turn on your external equipment.
4
Press INPUT to select HDMI to view a
digital program.
What you will need for connections:
19 Pin HDMI Digital Cable – 1
(Make sure you check the pin configuration of the
cable plug-end*)
*Adapter may be required. Check with your local
electronics store.
I
If the television HDMI pin configuration is different from the
pin configuration on your set-top box, you will need to use
an Adapter.
I
Press the INPUT key after connecting cables to access the
AV Inputs. There is NO need to tune to a blank channel.

DIGITAL AV CONNECTIONS

4
Need help?
SET-TOP BOX
(Can be a Digital Satellite Receiver,
DVD PLAYER,
or similar digital device.)
2
HDMI CABLE
(Gently insert
cable into TV
HDMI Input
jack.)
REMOTE CONTROL
3
SIGNAL CONVERSION CHART
INPUT SIGNAL
(From external equipment)
480i
480p
1080i
www.sanyoctv.com
Visit our Web site at
BACK VIEW OF DTV
OUTPUT SIGNAL
(Display)
720p
720p
720p
1-800-877-5032
or Call
11