Connect Stb Or Dvd With Dvi Output To Hdmi Input; Connecting Digital Audio Output To A Multi-Channel Receiver - Sanyo DP42746 Manual De Instrucciones

CONNECTING STB WITH DVI
OUTPUT TO HDMI INPUT
1
Switch off DTV and external equipment before con-
necting cable. (Cable is not supplied.)
2
Connect the STB DVI Output to a "DVI to HDMI
Cable;" then connect the cable to the DTV's HDMI
input.
NOTE: Check with your local electronics store for a
DVI to HDMI Cable that matches your equip-
ment and the DTV.
3
Connect the STB Audio L / R to the DTV's
VIDEO3 Audio L / R.
4
The DTV must be turned on first, press POWER. Then
turn on your external equipment.
5
Press INPUT to select HDMI to view a digital program.
SET-TOP BOX (Can be a Digital Satellite Receiver,
PLAYER,
or similar digital device.)
2
REMOTE CONTROL
What you will need for connections:
DVI to HDMI Cable – 1
5
Audio Cable – 1
4
I
Press the INPUT key after connecting cables to access the
AV Inputs. There is NO need to tune to a blank channel.
I
With a DVI connection, make sure you connect Audio out to
the TV's VIDEO3 Audio In.
12
Need help?
Visit our Web site at
DIGITAL AV CONNECTIONS
DVD
3
BACK VIEW
OF DTV
www.sanyoctv.com
or Call
CONNECTING DIGITAL AUDIO OUT
TO A MULTI-CHANNEL RECEIVER
®
Dolby Digital Audio provides 5.1 channels of surround
sound (five full-range channels [5] and one low-frequency
effect channel [.1]). A fiber optics cable is used to carry
the 5.1 surround sound (for low-noise signal transfer).
1
Using a Fiber Optics cable, connect the DTV's Digital
Audio Output to the Digital Audio Input of a Multi-
Channel Receiver. (Fiber optics cable is not supplied.)
2
Press POWER to turn on the DTV, then turn on exter-
nal equipment.
NOTES:
When making the connection, do not pinch or kink the fiber
optics cable.
Red light visible at the Digital Audio Output does not nec-
essarily indicate that Dolby
Digital audio is made up of light pulses that the human eye
cannot detect. Dolby
Digital Audio Output only when received as part of a Digital
signal.
1
OPTICAL
DIGITAL CABLE
What you will need for connections:
Optical Cable – 1
I
Because the VIDEO3 audio jacks are used to receive the
audio from the DVI device, these video jacks cannot be used
when a DVI device is connected.
I
Position your DTV at least 2 feet from stereo speakers. The
magnets in the speakers may affect the picture quality.
1-800-877-5032
®
Digital 5.1 audio is available.
®
Digital 5.1 audio is available at the
MULTI-CHANNEL RECEIVER
BACK VIEW
OF DTV
REMOTE CONTROL
2