Eschenbach visolux DIGITAL HD Manual De Instrucciones página 36

6. Open the settings menu, select the
menu level and then press the
7. Use the two scroll buttons (q, i) to select the
then press the
return to the previous page, select the
button.
During the firmware update, the "During Fw update. . . " message
appears on the display.
If the update has been successful, the visolux DIGITAL HD switches off
automatically. Never switch the device off and never remove the SD
card from the device during a firmware update. Otherwise, the visolux
DIGITAL HD could be irreparably damaged. This type of damage is not
covered by the guarantee!
HDMI connection
You can use the HDMI cable supplied to connect the device from its
HDMI output (u) to the HDMI input on another device, e.g. a television.
This enables both the camera image and the image files to be displayed
on the connected device.
USB connection
You can use the USB cable supplied to connect the device from its USB
connection (r) to the USB connection on another device, e.g. a com-
puter. The SD card inserted in the device will then be made available as
the "ESCHENBACH" drive for data operations.
Reset
If the reader stops working as described in this manual, it may be due a
fault that you can rectify yourself by resetting the reader. Insert a small,
pointed object carefully into the housing opening (2!) and press the
switch contained inside it.
button. If you want to cancel the update and
- 32 -
symbol in the second
button.
symbol and press the
symbol and