Ingersoll Rand IQ V20 Manual Del Usuario página 31

EN
The pressure relief valve is factory set to relieve pressure above 6500 psi (448 bar).
If grease is flowing from the pressure relief valve and the tool continues to run, then service is required by an authorized service center.
High Pressure Indicator
If the tool reaches maximum pressure, the pressure light will flash and the motor will stop. Release the trigger to reset.
Parts and Maintenance
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
47508715001_ed2 EN-3