Product Features; Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch Professional GSA 36 V-LI Manual Original

OBJ_BUCH-303-005.book Page 20 Tuesday, March 31, 2009 10:01 AM
20 | English

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Saw blade*
2 Adjustable footplate
3 Saw blade holder
4 Locking sleeve for saw blade
5 Stroke rod
6 Utility hook
7 Stroke speed selector switch
8 On/Off switch
9 Battery unlocking button
10 Battery*
11 Temperature control indicator
12 Battery charge-control indicator
13 Button for charge-control indicator
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Technical Data

Sabre saw
Article number
Rated voltage
Stroke rate at no load n
0
– 1st gear
– 2nd gear
Tool holder
Stroke rate control
Stroke
Cutting capacity, max.
– in wood
– in non-alloy steel
– Pipe diameter
Weight according
to EPTA-Procedure
01/2003
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
2 609 932 554 | (31.3.09)

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 86 dB(A);
Sound power level 97 dB(A). Uncertainty
K =1.5 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Cutting wood: Vibration emission value
a =29.0 m/s
h
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
GSA 36 V-LI
tion should also take into account the times
Professional
when the tool is switched off or when it is run-
3 601 F45 R..
ning but not actually doing the job. This may sig-
V= 36
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
-1
min 0 – 2400
the operator from the effects of vibration such
-1
min 0 – 3000
as: maintain the tool and the accessories, keep
SDS
the hands warm, organisation of work patterns.

Declaration of Conformity

mm 28
We declare under our sole responsibility that
mm 250 the product described under "Technical Data" is
in conformity with the following standards or
mm 20
mm 130 standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
kg 4.2
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
2 2
, Uncertainty K=1.5 m/s .
Bosch Power Tools