Product Features - Bosch GCM 12 GDL Professional Manual Original

34 | English
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Handle
(2) Lock-off switch for on/off switch
(3) Protective guard
(4) Retracting blade guard
(5) Adjustable fence
(6) Fence
(7) Saw table extension
(8) Mounting holes
(9) Insert plate
(10) Locking clamp
(11) Locking knob for various mitre angles
Mitre presetting lever
(12)
(13) Clamping handle for various bevel angles
A)
(14) Spacer
(15) Detents for standard mitre angles
(16) Recessed handles
(17) Hex key (6 mm/4 mm)
(18) Hex key (2 mm)
(19) Screw clamp
(20) Roller
(21) Angle indicator for right-hand bevel angle range (0°
to 47°)
(22) Chip deflector
(23) Chip ejector
(24) Dust extraction adapter
(25) Glide mechanism clamping lever
(26) Laser warning label
(27) Laser protection cap
(28) Glide arm
(29) Adjusting screw of depth stop
(30) Depth stop
(31) Transport safety lock
(32) Scale for bevel angle
(33) Angle indicator for left-hand bevel angle range (47°
to 0°)
(34) Adjustment knob for 22.5° bevel angle
(35) Locking screw for length stop
A)
(36) Length stop
(37) Scale for mitre angle
1 609 92A 5RR | (02.07.2020)
(38)
(39)
(40)
(41)
(42)
(43)
(44)
(45)
(46)
(47)
(48)
(49)
(50)
(51)
(52)
(53)
(54)
(55)
(56)
(57)
(58)
(59)
(60)
(61)
(62)
(63)
(64)
(65)
(66)
(67) /
(68) /
(69)
(70)
(71)
(72)
(73)
(74)
A)
(75)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Autogoods "130"
Saw table
Rotary knob for adjusting the bevel angle range
Saw blade
Laser beam outlet aperture
Locking screw for the linkage of the retracting blade
guard
Linkage of the retracting blade guard
Front fastening screw
(cover plate/retracting blade guard)
Rear fastening screw
(cover plate/retracting blade guard)
Cover plate
Spindle lock
Hex socket screw for mounting of saw blade
Clamping flange
Interior clamping flange
Clamping lever of the saw table extension
Locking screw for the adjustable fence
Damper
Set screws for damping
Holes for screw clamp
Wing bolt
Threaded rod
Angle indicator for mitre angles
On/off switch
On/off switch for laser (cutting line indication)
Screws for insert plate
A)
Clamping screw for length stop
Screw for laser protection cap
Set screw for positioning the laser (flush levelling)
Fastening screw for laser mounting plate
Fastening screw for laser housing
Set screws for 0° basic setting (bevel angle)
Set screw for 45° basic setting (left-hand bevel
angle)
Set screw for 45° basic setting (right-hand bevel
angle)
Set screws for mitre angle scale
Screw for mitre angle indicator
Set screw for adjusting the clamping force of the
clamping handle for any bevel angle
Hook-and-loop strap
Bosch Power Tools