Before You Start - brennenstuhl PM240S Manual De Instrucciones

Q
note: first stick the enclosed label in the language of your
particular country on the battery compartment cover 20 .
note: two round cell batteries (Alkaline LR44, 1.5 V) are
already inserted in the wattmeter on delivery.
i
i
i
i
Energiekostenmessgeraet_Content_PM240S_1.indd 45

Before you start

Remove the battery compartment cover 20 by unscrewing
the two screws with a suitable screwdriver.
Remove the isolating strip between the two round cell
batteries (Alkaline LR44, 1.5 V) on the back of the battery
compartment cover 20 .
Close the battery compartment by replacing the battery
compartment cover 20 . Please make sure that you
retighten the two screws firmly.
note: Make sure that you replace the battery compart-
ment cover 20 the right way round. The rounded corners
of the battery compartment cover 20 must fit into the
rounded recesses in the battery compartment.
The wattmeter is now ready for operation.
Before you start
GB 45
09.03.09 12:53