Operation; Connecting The Electrical Appliance To Be Tested; Current Measurement - brennenstuhl PM240S Manual De Instrucciones

Operation

Q
q
SHOCK! Only measure voltages of over 25 V
with the relevant safety instructions for the electrical appliance
you wish to test.
stated maximum input voltage.
i
i
q
i
46 GB
Energiekostenmessgeraet_Content_PM240S_1.indd 46
Operation
Connecting the electrical
appliance to be tested
CAUTIOn! RISK OF FATAL InJURY BY ELECTRIC
CAUTIOn! RISK OF InJURY! Never exceed the
Plug the wattmeter into a suitable outlet.
Now plug the mains plug of the electrical appliance you
wish to test into the socket 1 of the wattmeter.

Current measurement

Press the UP button 5 until the Ampere symbol 9
appears in the top third of the LCD display 2 .
note: the "Current measurement" function is the standard
setting for the wattmeter. As soon as the isolating strip
between the two round cell batteries is removed, the
wattmeter is automatically in this mode.
in compliance
~
09.03.09 12:53