Product Application - Ebode HDBT600 Guia Del Usuario

7.9 RS-232
Connect the provided 3.5mm to RS-232 cable between this port and RS-232 port of the
control device. Note: model HDBT600 does not have this RS-232 port!
8. CONNECTING AND OPERATING
1. Connect one HDMI cable between the HDMI output port of the source device and
the HDMI input port of the transmitter unit (5 meters max)
2. Connect one HDMI cable between the HDMI input port of the display device and the
HDMI output port of the receiver unit. (5 meters max)
3. Connect one 100 Ohm CAT5e/6 cable between the RJ45 port of the transmitter unit
and RJ45 port of the receiver unit. Note: CAT5e/6 is to be no longer than 60 meters
in length.
4. Connect 5V DC power supplies to both the transmitter and receiver unit.
5. Power on the display device and then the source device.
9.

PRODUCT APPLICATION

In case of problems please read the Frequently Asked Questions at our website
www.ebodeelectronics.eu
and more.
6-10-2015
as well as for the latest updates of data sheet, user manual
6 ebode HDBT600/HDBT602