Supplied Accessories - Panasonic Lumix H-RS100400 Instrucciones De Operación

• Do not place the lens mount facing downwards. Do not
allow the lens contact points 1 to become dirty.
∫
About Condensation (Fogging of the Lens)
• Condensation occurs when there are differences in
temperature and humidity as described below.
Condensation can cause the lens to become dirty and
lead to mold and malfunctioning, so exercise caution in the
following situations:
– When the camera is brought indoors from outside during
cold weather
– When the camera is brought into an air-conditioned car
– When cold air from an air conditioner is directly blown
onto the lens
– In humid places
• If condensation occurs, turn the power off and leave it for
about two hours. Once the camera acclimatizes to the
surrounding temperature the condensation will go away
naturally.
4
SQT1200

Supplied Accessories

Product numbers correct as of January 2016. These may
be subject to change.
1 2
SFC0360 SYQ0679
5
SYQ0680
1 Lens Pouch
2 Lens Hood
3 Lens Cap
4 Lens Rear Cap
5 External tripod mount
• The lens rear cap and lens cap are attached to the
interchangeable lens at the time of purchase.
3 4
SYF0074 VFC4605