Beper Stirello Manual De Instrucciones página 12

Steam Generator Use instructions
4. The plug must be removed from the socket-outlet before the water reservoir is filled with water (for
steam irons and irons incorporating means for spraying water);
5. -the filling aperture must not be opened during use. Instructions for the safe refilling of the water
reservoir shall be given (for pressurized steam irons);
6. -the iron must only be used with the stand provided (for cordless irons);
7. –the iron is not intended for regular use (for travel iron);
8. –the iron must be used and rested on a stable surface;
9. –when placing the iron on its stand, ensure that the surface on which the stand is placed is stable;
10. -The iron is not be used if it has been dropped, if there are visible signs of damage or if it is
leaking.
Introduction:
The iron offers non-stop ironing and also has a detachable water tank that can be refilled at any
moment.
The iron has a high steam output and gives you a constant and fast ironing result.
Description of the appliance Fig. 1
1) Iron temperature adjustable
2) "ON/OFF" switch
3) Indicator light of steam button
4) Iron test
5) Monotube (cable + steam tube)
6) Steam button
7) Indicator light of NO WATER
8) Indicator light of steam
9) Steam switch
10) Water tank
11) Cover of water tank
12) Steam Holding System
13) Power cable
14) Steam regulater
Preparing for use
Filling the detachable water tank
● If the tap water in your area is very hard, We advise you to mix the tap water with a equal amount
of demineralised water.
● Do not put perfume, vinegar, starch, descaling agents, ironing aids, other chemicals or 100 per-
cent distilled water in the water tank.
1. Remove the detachable water tank from the steam tank.
2. Fill the water tank with water up to the MAX indication.
3. Slide the water tank back into the steam tank.
12