Tripp-Lite PDUMH20HV Manual Del Propietário página 3

Installation
Determine Installation Configuration
1
This PDU supports 1U and 0U rackmount, wall-mount, and under-counter
installation configurations. Choose a configuration and follow the appropriate
installation instructions.
Note: Regardless of installation configuration, the user must determine the fitness of
hardware and procedures before mounting. The PDU and included hardware are designed
for common rack and rack enclosure types and may not be appropriate for all applications.
Exact mounting configurations may vary.
1-1
1U Rack Installation: Attach the
PDU to the rack by inserting four
user-supplied screws
the PDU mounting brackets
into the mounting holes of the rack
rail as shown.
1-2
0U Rack Installation: Part 1:
Remove the screws
the mounting brackets to the PDU,
change the orientation of the
brackets as shown and reattach
the brackets. Use only the screws
supplied by the manufacturer or
their exact equivalent (#6-32, 1/4"
flat head). Part 2: Attach the PDU
vertically by inserting two or more
user-supplied screws
the PDU mounting brackets
into mounting points in the rack or
rack enclosure.
1-3 Wall Installation: After repeating
Part 1 in Step 1-2, attach the
PDU to a stable mounting surface
by inserting two or more user-
supplied screws
PDU mounting brackets
into secure mounting points on the
mounting surface.
18-11-316-933051.indb 3
through
A
and
B
attaching
C
through
A
and
B
through the
A
and
B
3
A
A
1-1
B
1-2
B
1-3
B
A
C
A
A
C
A
2/11/2019 2:06:46 PM