Tripp-Lite PDUMH20HV Manual Del Propietário página 4

Installation
1-4 Under-Counter Installation:
After repeating Part 1 in Step
1-2, attach the PDU to a stable
mounting surface by inserting four
user-supplied screws
the PDU mounting brackets
into secure mounting points on the
mounting surface.in the rack or
rack enclosure.
Establish a Power Connection
2
2-1 NEMA Adapter Connection
(Optional): This PDU includes a
plug adapter that adds a NEMA L6-
20P plug to the input power cord.
Use this adapter only if you will be
connecting the PDU to a NEMA L6-
20R outlet. Insert the IEC 60320
C19 connector
into the IEC 60320 C20 connector
of the input power cord. Secure
B
the connection with the retention
bracket by using the included
C
bolts to fasten the two halves of
the bracket around the connection
as shown.
CAUTION: To avoid the risk of electric
shock, ensure that the Neutral (L2)
conductor has been identified before
connecting the PDU.
18-11-316-933051.indb 4
through
A
and
B
of the adapter
A
4
B
A
1-4
C
2-1
C
B
A
C
A
B
2/11/2019 2:06:46 PM