Tripp-Lite DWM3750S Manual Del Propietário página 4

1a. Mount on Wood Stud Wall
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
15-09-383-933502.indb 4
Find a wood stud location for
mounting the wall mount
Anchor Bolt
Insert the two plastic covers
on wall plate for decorative
appearance.
WARNING
4
30 mm
(1.2")
3 mm
0.2")
1 2
Mark the exact location of the
mounting holes
3
Drill pilot holes
Screw the wall
mount onto
the wall
10/21/2015 10:30:31 AM