Residual Risks; Intended Use; Device Elements - Würth DSN 160 Traducción Del Manual De Instrucciones De Servicio Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
In the following situations, nails can
break into several parts after their inser-
tion causing severe injuries:
If too soft, thin or too hard materials are
penetrated or if the penetration depth is set too
high.
If nails impact other nails after penetration.
Maintain at least 5 cm distance from edges
and corners.
Do not use the air nailer if people are present
opposite to the nailer.
Always position the air nailer at an angle of
90° to the surface.
Protection of persons:
Do not hold the handle too forcefully.
Take a break if your fingers/arms feel numb,
extremely hot or cold or you are suffering from
pins and needles. Consult a doctor if such
symptoms keep occurring.
Property damage:
Do not use the air nailer in the rain or in very
damp surroundings.

Intended use

The nailer is intended solely for connection to a
standard compressed air compressor and for the
firing of approved fasteners.
The user is responsible for damage result-
ing from improper use.
22
Safety instructions
Do not expose the air nailer to high tempera-
tures, e.g. direct sunlight.
Only use the air nailer outdoors or in well ven-
tilated areas at temperatures between -10°C
and 40°C.
Do not use the air nailer with an empty mag-
azine.
Only store the air nailer in dry, frost-free rooms.
Stop work immediately in the following
situations:
If the hose is visible damaged.
If screws or other parts have come free or
fallen from the device.

Residual risks

In spite of observation of the applicable safety
regulations and use of protective devices, certain
risks cannot be avoided. These include:
Damage to hearing.
Risk of injury due to projectile parts.
Risk of burns due to accessories becoming hot
during operation.
Risk of injury due to persistent use.
Overview (fig. I-III)
1 Handle
2 Magazine
3 Auxiliary handle (removable)
4 Depth adjustment
5 Splinter shield
6 Workpiece contact/muzzle
7 Magazine slide
8 Trigger
9 Magazine opening
10 Slide lock

Device elements

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

0703 560 0

Tabla de contenido