Customer Settings - Stalgast 803021 Instrucciones De Uso

2. Button functions
Start button
Set button
Down arrow
Up arrow
Stop button
3. Displays
19
9 22
4. Parameter setting
After the first pressing of
password.
a. programming of temperatures and times

CUSTOMER SETTINGS

SET
Press
temperature (70-95
The
SET
Press
temperature (40-70
SET
display 1 – indicates the rinsing and sanitization temperature; washing cycle length
SET
the display will show
arrows to change the data on display 2 into:
again. The displays will show the following data:
o
C)
arrows can be used to adjust the temperature on display 2.
again. The displays will show the following data:
o
C).
• turns the device on
• Pressing the button with the door open, launches the STOP
function. You can then close the door without starting the wa-
shing cycle. To turn the function off, press the button again
• confirmation of the introduced input data, setting of the
password
• access to data setting: P1, P2, P3, P4, P5, P6
• reduces the washing or rinsing temperature
• drain pump (optional)
• increases the washing or rinsing temperature and increases
the duration of the wash or rinse cycle. C1-90 sec. C2-120 sec.
C3-180 sec.
• turns the device off (does not disconnect the device from power
supply, the complete disconnection of the device occurs after
the plug is removed from the socket or the main external switch
is turned off ), stops the washing and rinsing process
C1 – C2 – C3
display 2 – indicates the washing temperature
- 34 -
. Use the
. This is the factory-set
- sanitization-rinsing
- washing water