hafele Dialock WT2000 Instrucciones De Montaje Y De Servicio página 27

• Place the reader unit in the frame and push to snap in.
• To dismantle, push a screwdriver into the slot and lever the unit out as
shown.
Mounting the control unit
The control unit may be damaged by use of unsuitable tools.
- The distance between the control and reader unit may be up to 50
- Mount the control unit on a standard rail (top-hat rail) in accordance
- Connect the wires as stated in table 2 page 25.
- If necessary, connect the recovery diode on the equipment being
125_WL_Buch.indb 27
metres.
with DIN EN 50022.
switched (door opener).
Wall terminal Dialock - status: 12.2008 - 732.29.125
Mounting and Operating Instructions
27
05.12.2006 17:11:01