hafele Dialock WT2000 Instrucciones De Montaje Y De Servicio página 29

5. Hold the red deletion key in front of the reader unit while the red LED is
flashing.
The red LED lights continously after successful assignment.
If an error occurs during assignment:
 Disconnect the power supply and then reconnect it. Perform total reset,
if required (see page 32).
 Re-assign programming and deletion keys.
If the error persists:
 contact your service agent.
125_WL_Buch.indb 29
Mounting and Operating Instructions
Wall terminal Dialock - status: 12.2008 - 732.29.125 29
05.12.2006 17:11:01