Dell PowerEdge R420xr Manual De Instrucciones página 12

Figure 1-6. Installing the Plastic Block on Riser 1
1 screw (DPN: VW2J4)
3 riser 1
3 Locate the Phillips head screw and the plastic block in the 901D
reinforcement kit.
4 Install the plastic block on riser 1 along with the riser securing tab as
shown in Figure 1-6.
5 Install the riser 1 assembly on the system board.
10
Installation Guide
2 plastic block (DPN: TGNK5)
4 riser securing tab