MountInG oVEn to tHE Wall
Two people are recommended to attach the Over the Range
Microwave Oven to the Mounting Plate.
1. Thread the power supply cord through the hole made in the
bottom of the top cabinet. Install the oven by snapping it onto
the Mounting Plate. See Figure 20.
2. Use two Tapping Screws to secure the levers that are on the
bottom of the oven. See Figure 21.
Installation Instructions
Figure 20
Figure 21
3. Use two Top Cabinet Screws and two Flat Washers, supplied
in the INSTALLATION HARDWARE, to attach the unit to the
top cabinet. See Figure 22.
3
6
EXtErIor dIMEnsIons
Models EI30MH55GS/GB/GW:
29
1
29
/
"(W) x 17
/
"(H) x 16
32
16
cHEcKlIst for InstallatIon
1. Make sure the unit has been installed according to all of
the Installation Instructions and the Wall and Top Cabinet
Templates.
2. Plug in the power cord.
3. Keep the Use and Care Guide.
7
4
Figure 22
5
/
"(D)
32
E