Hi/Lo Limits; Tol - Promax MZ-505C Manual De Instrucciones

The user (see "SET" in this manual can also set the relative
value). When the desired relative value has been entered, press
[5] key to enter the Relative mode, and press
use Relative value as a reference value. Press
the relative Mode.

4.11 HI/LO LIMITS

Press
manual range mode, the original Hi/Lo LIMITS value and
annunciators "
When the input exceeds Hi limits, the "
a continuous tine. When the input goes below the Lo limits, the "
is blinking and the beeper emits a pulse tone. This warns users that
out of setting ranges, press "Hi/Lo LIMITS" again to exit this mode.
In additions, the meter will ignore and not to record if overload
("OL") situation happens in the comparative processes or in the
capacitance range 50 counts.

4.12 TOL

Press
manual range mode automatically, the original preset standard value
and enunciators "TOL" appear in the same time individually. How to
set standard value please refer to SET in this manual. When
entering TOL mode, the Main display is the present value and the
second display is tolerance value.
Page 24
[12] to enter the Hi/Lo LIMITS mode, and change to
" " " appear in the same time individually.
[13] to enter the tolerance mode, and change to
INSTRUCTION MANUAL. MZ-505C
" is blinking and emits
[11] key to
[5] again to exit
04/2015
"