Low Battery Indication - Promax MZ-505C Manual De Instrucciones

INSTRUCTION MANUAL. MZ-505C
Calibration prompts will be displayed automatically every time
those ranges are manually or functionally selected, (e.g. REL, TOL,
REC etc.), and calibration is recommended. Simply follow the open
Open
connector (
press the
the [9] button.
Notes: 1.- Changing measurement frequencies is handled the
same as selecting a different hardware range, and so
automatic calibration prompts will be displayed in the
recommended ranges.
2.- Be sure to use same testing position after short
calibration.

4.15 Low battery indication

When the "
voltage is below normal working voltage and is weakening. Replace
battery with a new one to maintain accuracy of the meter.
04/2015
) or short connector (
[11] button. You may skip the calibration by pressing
" symbol flashes on the display, the battery
shrt
) instruction and then
Page 27